20-04-2008, 03:47 PM
Roger_Sausage Wrote:
nez Wrote:
dont just talk about it get it done lol
Lol, now we've bullied Ste in to buying stuff let's start on D! 
how about u bully me with £20 notes and a session at angelworks
20-04-2008, 04:56 PM
21-04-2008, 10:35 AM
Update...
Engine block painted, all sensors cleaned and replaced. Head painted and lifting kit has been cleaned and fitted. All mating faces have been lightly wet n dried with 800 grit to remove and corrosion or old gasket/sealant.
I am now waiting for my uprated cams to come back from Hiflow. Throttlebodies ECU etc should be here for Wednesday.
No pics this time though I am saving the pictorial update for when the engine is back together and I shall do a before and after.
Engine block painted, all sensors cleaned and replaced. Head painted and lifting kit has been cleaned and fitted. All mating faces have been lightly wet n dried with 800 grit to remove and corrosion or old gasket/sealant.
I am now waiting for my uprated cams to come back from Hiflow. Throttlebodies ECU etc should be here for Wednesday.
No pics this time though I am saving the pictorial update for when the engine is back together and I shall do a before and after.
25-04-2008, 01:13 AM
Just finished in the garage about 20 minutes ago.
After tidiying up the garage and making some room to work, the 106 finally made it into the garage
So i set to work removing the battery, ecu, front wheels, bumper, head lights and radiator/fan.
I'm now ready to remove the front slam panel, but needed to drill two rivets that were holding me back and seeing as it was nearly midnight at this point i decided to call it a night and tool up
After tidiying up the garage and making some room to work, the 106 finally made it into the garage
So i set to work removing the battery, ecu, front wheels, bumper, head lights and radiator/fan.
I'm now ready to remove the front slam panel, but needed to drill two rivets that were holding me back and seeing as it was nearly midnight at this point i decided to call it a night and tool up
25-04-2008, 01:42 AM
25-04-2008, 10:47 AM
25-04-2008, 10:53 AM
Less typin' more building!
25-04-2008, 10:59 AM
They've arrived at 9:47, and he doesn't finish work till 6. Someone's day's going to go really slow. I might even be late to pick you up too 
25-04-2008, 11:27 AM
lol...
I gotta wait for neil to come round tommorow and rebuild it all.
but, yeah your right I *AM* itiching to get back into the garage.
Once the slam panel is off we are onto the mucky work behind the back of the engine and driveshafts
I gotta wait for neil to come round tommorow and rebuild it all.
but, yeah your right I *AM* itiching to get back into the garage.
Once the slam panel is off we are onto the mucky work behind the back of the engine and driveshafts
25-04-2008, 11:51 AM
25-04-2008, 12:14 PM
hahaha moist
looking.. well.. in pieces!
keep us updated with pics man
garage looks quite big really with the car in doesnt it
looking.. well.. in pieces!
keep us updated with pics man
garage looks quite big really with the car in doesnt it
25-04-2008, 12:16 PM
26-04-2008, 01:52 AM
26-04-2008, 09:27 AM
26-04-2008, 11:20 AM