anyone help me find a few things about the series 2 rst. i need the following information.....
1 - gearbox ratios
2 - diff ratio
3 - thread type & of oil pressure switch
thanks.
Engine
Type: CVH
Capacity: 1596cc
Bore/Stroke: 79.9mmx79.5mm
Compression ratio: 8.2:1
Max Power: 132bhp@5750rpm
Max Torque: 132 @ 2750rpm
0-60: 8.2 seconds
1/4 Mile: 16.8 seconds
Max Speed: 128mph
Transmission
Five speed manual Ford BC box, 3.821:1 final drive ratio, viscous coupled limited-slip differential, 220mm clutch.
Chassis
6x15" six-spoke alloys with Dunlop or Goodyear 195/50 tyres. MacPherson front struts, 134.4 lb/in front coil springs and 24mm front anti-roll bar, pressed steel rear swinging arms and strut type shock absorbers, longitudinal location tie-bars, 16mm rear ani-roll bar, non concentric 291.2 lb/in rear coil springs. 260mm XR4x4 ventilated front discs, 229mm rear drums. servo assistance, diagonally split circuit, anti-lock brake system.
Exterior
Electrically heated and operated door mirrors, front driving lamps, tinted glass, 0.36 Cd drag efficient, 980kg, anti burst door locks.
Interior
Electronic self-seek AM/FM stereo radio/cassette - model 2005 with anti theft coding, four speakers, optional fuel computer, model 2007 stereo and seperate power amplifier, graphic EQ
taken from here;
http://www.fasterfords.com/guides/s2_rst.htm
cool bit of info but they made a slight mistake the gearbox is called the B5 not BC.
ill find the thread type of oil pressure switch tomorrow, got a CVH turbo engine in bits
nice one guys, more info the better.