22-09-2007, 07:43 PM
Right,
Where to start....
I have the Kit mentioned below but I have no clue on where to start and how to fit it how I think it should work...
I want to use the Kenwood unit as my main unit connecting it to the car speakers, and connected to the amp powering the 6x9's
I think want to have the dvd player hooked up but not connected to any speakers as I THINK, I should be able to connect this to my main unit AUX for sound through the speakers if i wanted to?
However the kids will usually watch the dvds etc.. through headphones.
I have a video splitter as the dvd player only has 1x RCA set so now its connected toa signal booster with 8X RCA sets.
Although 1 problem left and thats turning the 1x Audio RCA set for it to connect to 2x monitors.... Im sure there should be a RCA lead i can get that connects to 1 RCA and makes it into 2? or some kind of splitter...?
The car currently has the needed cables already connected however I may need to upgrade them bigger fuse etc.. for the amp I have.
**Anyone Good with ICE installs? Want to earn a few quid? or know a good place to go to have it all fitted?** (Mansfied / Nottingham Area - Im in Gedling)
ICE List:
Just waiting on the Kenwood Unit to arrive should be monday!
1x KENWOOD KDC W7537U - Radio/CD/MP3 Player
1x All-in-1, 7" Motorized Car DVD+Divx+MP3+CD+TV+FM Player
1x Car Freeview Digital DVB-T TV Receiver Box
2x 9" TFT LCD Headrest Monitors
2x Lanzar 500W 6''x 9'' Three-Way Speaker System
1x Lanzar Heritage 2 Channel 1600 Watts Amp
Amp information:
Lanzar Heritage 2 Channel 1600 Watts Amp
2x400W RMS at 4 OHMS
2x800W Max at 4 OHMS
1x1600W Max at 4 OHMS
Bridged 2x800W RMS at 2 OHMS
Speaker Information:
Lanzar 500W 6''x 9'' Three-Way Speaker System
Power Handling: 225 Watts RMS /500 Watts Peak
Frequency Response: 40-22KHz
Impedance: 4 Ohms
LANZAR 6.1 500W 6.5 INCH 17CM COMPONENT SPEAKERS
200 Watts RMS/ 400 Watts Peak
Frequency Response: 70-6KHz
Impedance: 4 Ohms
Where to start....
I have the Kit mentioned below but I have no clue on where to start and how to fit it how I think it should work...
I want to use the Kenwood unit as my main unit connecting it to the car speakers, and connected to the amp powering the 6x9's
I think want to have the dvd player hooked up but not connected to any speakers as I THINK, I should be able to connect this to my main unit AUX for sound through the speakers if i wanted to?
However the kids will usually watch the dvds etc.. through headphones.
I have a video splitter as the dvd player only has 1x RCA set so now its connected toa signal booster with 8X RCA sets.
Although 1 problem left and thats turning the 1x Audio RCA set for it to connect to 2x monitors.... Im sure there should be a RCA lead i can get that connects to 1 RCA and makes it into 2? or some kind of splitter...?
The car currently has the needed cables already connected however I may need to upgrade them bigger fuse etc.. for the amp I have.
**Anyone Good with ICE installs? Want to earn a few quid? or know a good place to go to have it all fitted?** (Mansfied / Nottingham Area - Im in Gedling)
ICE List:
Just waiting on the Kenwood Unit to arrive should be monday!
1x KENWOOD KDC W7537U - Radio/CD/MP3 Player
1x All-in-1, 7" Motorized Car DVD+Divx+MP3+CD+TV+FM Player
1x Car Freeview Digital DVB-T TV Receiver Box
2x 9" TFT LCD Headrest Monitors
2x Lanzar 500W 6''x 9'' Three-Way Speaker System
1x Lanzar Heritage 2 Channel 1600 Watts Amp
Amp information:
Lanzar Heritage 2 Channel 1600 Watts Amp
2x400W RMS at 4 OHMS
2x800W Max at 4 OHMS
1x1600W Max at 4 OHMS
Bridged 2x800W RMS at 2 OHMS
Speaker Information:
Lanzar 500W 6''x 9'' Three-Way Speaker System
Power Handling: 225 Watts RMS /500 Watts Peak
Frequency Response: 40-22KHz
Impedance: 4 Ohms
LANZAR 6.1 500W 6.5 INCH 17CM COMPONENT SPEAKERS
200 Watts RMS/ 400 Watts Peak
Frequency Response: 70-6KHz
Impedance: 4 Ohms